
Switch actuator for brand switches — with signal lamp
Switch actuator for brand switches – with signal lamp
Conveniently switch all devices in the home and let the signal light display different scenarios with certain colour combinations. To do this, simply install the switch actuator for brand switches.
Checking a device status - via colour signal
How many times have you walked through your home to check if all windows are reallyclosed? And how many times have you wished you had an orientation light in the hallwayfor nighttime? The Homematic IP switch actuator for brand switches has a signal lampand is suitable for exactly these instances. Open windows and many other possiblescenarios are shown to you via particular colour combinations. If you want it to. thisall-rounder also switches various devices as well as lights.
Highlights:
The smart actuator for any situation
The devices easily adapt to your everyday life and can for example be switched at any desired time - evendepending on events such as sumrise or sunset
Installed in a Size 55 frame
Simply integrate the actuator into your existing Size 55 switch frames from the following manufacturers: Berker.Busch-Jaeger, GIRA, Merten, JUNG,
A signal lamp to meet your needs
Simply set the colour and brightess of the signal lamp and display different states of various devices. The signallamp acts as an orientation light when it's dark.
Technical Parameters
Product Name (Short) | HmIP-BSL | Cable type and cross section | Rigid and flexible cable, 0.75-1.5 mm² |
Item Number | 152020A0 | Degree of protection | IP20 |
Supply voltage | 230 V/50 Hz | Dimensions (W x H x D) | 86 x 86 x 52 mm (depth for flush-mounting: 32 mm) |
Current consumption | 5 A max. | Ambient temperature | 5 to 35 °C |
Power consumption in standby | 0.32 W | Weight | 88 g |
Relay | Changeover contact | Radio frequency | 868.0-868.6 MHz/869.4-869.65 MHz |
Load type | Ohmic load | Typ. open area RF range | 230 m |